Help & Advice
Practical maintenance guidance, trusted UK resources and free EEFS logbooks.
Fire Alarm Systems
Testing, fault reporting, servicing and record keeping.
Routine user checks
- Carry out the weekly user test appropriate to your system and site procedure, normally rotating the manual call point used.
- Check the panel shows normal operation; record the date, call point, outcome and any fault.
- Check that exits and manual call points remain accessible. Do not silence or isolate a system without an authorised procedure.
- Arrange periodic inspection and servicing by a competent fire alarm organisation. Frequency should reflect the system and applicable standards.
When to contact EEFS
Repeated false alarms, panel fault or disablement indicators, damaged devices, failed tests, or unexplained activations.
Intruder Alarm Systems
User operation, warning signals and maintenance records.
Routine user checks
- Check the control panel or keypad for fault, tamper or low-battery warnings.
- Confirm doors and windows protected by the alarm close and latch properly.
- Carry out user tests only as described in your manufacturer's instructions, informing any alarm receiving centre where required.
- Keep a record of activations, false alarms, changes to users and engineer visits.
When to contact EEFS
Recurring false alarms, tamper warnings, loss of communication, low-battery alerts or inability to set/unset the system.
CCTV Systems
Recording checks, image quality, retention and privacy.
Routine user checks
- Check that all required cameras show a clear image and the correct time and date.
- Confirm recordings can be found and played back, not just viewed live.
- Check available storage and retention settings against your organisation's policy.
- Keep lenses clean where safely accessible; check signage and access permissions.
When to contact EEFS
Missing camera images, recording failures, network faults, time drift or recurring storage problems.
Electrical Installations
Safe visual checks and competent inspection.
- Look for damaged accessories, scorch marks, unusual heat, burning smells and repeated circuit trips.
- Do not remove covers, open distribution boards or reset repeatedly tripping protective devices.
- Arrange inspection and testing according to the installation's condition, environment and risk assessment.
Emergency Lighting
Escape-route lighting and routine records.
- Check fittings and exit signs are visible and unobstructed.
- Arrange regular short functional checks and periodic full-duration tests appropriate to the system and current guidance.
- Record test outcomes and arrange prompt replacement or repair of failed fittings.
Access Control & Door Entry
Secure access without compromising safe escape.
- Check card readers, intercoms and authorised door release controls operate normally.
- Review staff permissions when people join or leave.
- Report doors that fail to secure or could prevent emergency escape.
- Never disable fire-door release or emergency escape functions to resolve a fault.
Need an engineer?
For persistent faults or planned servicing, send the details to our maintenance team.
โ Raise Maintenance RequestReferences to British Standards are explanatory. Full standards may require purchase from the authorised publisher. Guidance should be reviewed against current requirements.
